How to install the SPC clicklock vinyl flooring, you will understand after reading these pictures
How to install the SPC clicklock vinyl flooring, you will understand after reading these pictures
1. Insert the B plank convexly into the groove and lock it flat.
2. After the flattening, the distance between the B plank and the C plank is about 2-3 mm in parallel.
3. Lift the A plank and the B plank at the same time (about 45 degrees from the ground).
4. Push the face of the B plank towards the C plank until it is locked.
5. Press the A and B planks down with the palm of your hand, do not force the floor hard.
